Basic Info.
Application
Home Appliance, Environmental Equipment, Petroleum Machinery Manufacturing, Agriculture Machinery, Food Machinery, Automotive Industry, Advertising Industry
Cooling System
Air Cooling
Technical Class
Continuous Wave Laser
Applicable Material
Metal
Structure Type
Gantry Type
Laser Classification
Solid Laser
Laser Technology
Laser Control Fault Cutting
Control Software
Cypcut, Automatic Control
Graphic Format Supported
Ai, BMP, Dst, Dwg, Dxf, Dxp, Plt
After-Sales Service Provided
Engineers Available to Service Machinery Overseas
Minimum Line Width
0.02mm
Warranty
2 Years for Whole Machine
Working Votage
AC380V/50Hz
Diver
Japan Yaskawa Motor and Driver
Specification
CE Standard
Origin
Shandong Jinan China
Product Description
300W 500W 750W 1000W Fiber Metal Laser Cutting Machine DEK-1325Why use 300w 500w 750w 1000w fiber metal laser
(1) Fiber laser cutting machine for metal precise cutting powered by fiber laser technology. The quality fiber laser beam results in faster cutting speeds and higher quality cuts compared to other cutting solutions. The key advantage of a fiber laser is its short beam wavelength (1,064nm). The wavelength, which is ten times lower than that of C02 laser, generates high absorption into metals. This makes the fiber laser become a perfect tool for cutting metal sheets of stainless steel, carbon steel, mild steel, aluminum, brass, etc.
(2) The efficiency of a fiber laser far exceeds traditional YAG or CO2 laser. The fiber laser beam is capable of cutting reflective metals with much less energy as the laser is absorbed into the metal being cut. The unit will consume little to no energy when not active.
(3) Another advantage of fiber laser is the use of highly reliable single emitter diodes with projected lifetimes greater than 100,000 hours of continuous or pulsed operation.
(4) Laser software allows for the capability to control power, modulation rate, pulse width and pulse shape giving the user full control of the lasers capabilities.
1.Great Performance
Identical cutting quality on any cutting point is realized through fiber transmission.
2.High Efficiency
The rapid cutting speed is two times higher than that of CO2 laser machine.Its use-cost is low.
3.Low Consumption of Gas
Laser cutting does not make any gas because of the specific cutting technology on steel plate.
4.Low Consumption of Energy
It is environment-protecting and energy-saving.Its power consumption is reduced by 20%-30% compared with that of CO2 laser machine.
5.Maintenance-free
Reflecting lens is not needed for fiber transmission.Much time is saved when optical path is adjusted.It is maintenance-free.
Technical parameter of 300w 500w 750w 1000w fiber metal laser
| Model | DEK1530E | DEK1530H | DEK2040 | DEK2060 |
| Laser Power | IPG 500W/1000W/2000W/3000W
Rofin 1500w/2000w/3000w
Raycus 500w/750w/1200w |
| Machine Transmission System | *Beckhoff/Japan strong power YASKAWA full closed loop every 0.1mm step under control *TBI high accuracy ball screw-0.01mm accuracy in moving process--mini circle cutting best |
| Optics System | * LASER MECH/ German PRECITEC -0.01second adjust time--0.01mm different point will ask head to adjust to best point cutting *Dynamic focus - even min wave keep same top level cutting result *Nozzle diameter from 1.5mm-2.5mm for different kerf cutting inquiry |
| Cutting thickness | Carbon steel 0.1-20mm Stainless Steel 0.1-12mm AL 0.1-12mm |
| Controlling Software | Beckhoff/CypCut |
| Software Support | *AutoCad file import directly without size change and modify *Nesting software to make material in max cutting use *Optimal Track Intelligent Adjusting shortest path least time save gas cost and cutting time |
| Assistant Gas | * Air,nitrogen,oxygen freely change system * Less gas cost control under different cutting thickness |
| Cutting speed | 0-60m/min |
| Position Accuracy | 0.03mm |
| Water Cooling System | Dual temperature dual control water chiller with purification system |
| Driving Mode | Double ball screw driving / Double gear rack driving |
| Working Table Structure | Fixed Working Table / Pallet Changer |
300w 500w 750w 1000w fiber metal laser Detail Show
300w 500w 750w 1000w fiber metal laser Speed
Material | m/min |
carbon steel 1mm | 8 |
carbon steel 2mm | 4.2 |
carbon steel 3mm | 2.1 |
carbon steel 4mm | 1.2 |
stainless steel 1mm | 7.2 |
stainless steel 1.5mm | 3 |
stainless steel 2mm | 1.8 |
galvanized sheet0.8mm | 5 |
galvanized sheet1.2mm | 2.6 |
galvanized sheet1.5mm | 1.8 |
300w 500w 750w 1000w fiber metal laser Running cost
Electricity cost | 1-3KW |
Laser gas | Not |
Assisted gas | Oxygen/Nitrogen/compressed air |
The parameters showed are based on the client actual working situation,only for reference!
The assisted gas will be used according to the different materials (such as stainless steel and carbon steel). |
Application Industry of 300w 500w 750w 1000w fiber metal laser It is applicable to sheet metals, elevator,kitchenware,elevator,fitness equipment,agricultural and forest machinery,food machinery,hardware, advertising, decoration, gifts, lighting lamps, medical instruments etc.
Application Materials
Professional used to cut sheet metal, in a variety of high quality carbon steel sheet, stainless steel plate , aluminum alloy plate, galvanized sheet, electrolytic plate, silicon steel, titanium alloy, aluminium zinc plate and other metal materials.300w 500w 750w 1000w fiber metal laser samples
Quality control:
- Before the order can be confirmed finally, we would strictly check the material, dimension of the sample step by step.
- Our salesman, also as a order follower,would trace every phase of production from the beginning.
- We have a QC team, every product would be checked by them before packed.
- We would try our best to help clients solve problems.
Address:
E-15 Huaqiang International Center, Shanda Road, Jinan, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Welcome to DEKCEL CNC, where our friendly and knowledgeable staffs are happy to assist you with your CNC needs. DEKCEL do not just sell CNC machines. We offer CNC solutions to Customers. Provision of a CNC machine is more than just the provision of a machine tool. Jinan DEKCEL provide a range of CNC Router, CNC laser, plasma cutting machine, laser marking machine etc. Having manufactured, sold, installed and supported over 7000 CNC machines. The professional CNC router, laser, plasma cutter we offer have exceptional long term stability, high cutting performance potential in a variety of applications and the machine systems are built to last. Listening to customers′needs and building high quality CNC Routers, laser, Plasma Cutters etc to fulfill their requirements is the way we do business in the CNC marketplace. If you are looking to get into the CNC world, have a CNC application in mind, have a new business idea or looking to further your production, have a look at what DEKCEL have to offer you!
){kind=link}